How To Install: Steam Deck Edition

Instructions:

  1. Make sure the back of your Steam Deck is clean.

  2. Cut out the Alignment Template from the package insert.

  3. Remove the backing from one Quick Connect Plate (they are both the same).

  4. Align the cutout of the Plate with the two top screw holes on the back of the steam deck. There should be an even clearance on the top and sides.

  5. Place the Alignment Template in the cutout of the top plate so the corners cover the two screw holes.

  6. Remove the backing from the remaining Quick Connect Plate and align the cutout with the bottom of the Template.

  7. Remove the template and check to ensure the Plate is parallel with the valve logo (or close enough).

  8. Press both plates down with firm even pressure.

  9. Place the cover on the front screen, twist the Stick Locks onto the thumbstick shafts. Then fold the cover around the back and it should magnetically “snap” to the Plates.